The equipment known as Digitrac 555B is a fully automatic digital traction unit for the treatment of the back and the neck, with 3 different treatment modes.
 

Variable traction speed

The time it takes for the force to reach the level 99 kg can be adjusted from 9 to 35 seconds in traction or releasing, which makes treatment comfortable and accurate.


Automatic traction adjustment

In case that the traction of the rope be reduced by 3kg. Or more because of patient’s movement, the unit would automatically readjust the force to settings, ensuring an effective & reliable treatment.


Accurate display of full details

All parameters (traction force, relaxation force, duration of traction, speed of traction, duration of treatment and its mode) may be digitally and accurately adjusted. All above information will continuously displayed on LCD while treatment.

• The level of real traction would also be precisely & separately displayed on 7seg. Which enables the therapist to compare the actual rate with the adjusted rate, moment to moment.
• There are four signal lights, PULL, HOLD, RELEASE and REST, which constantly inform the therapist of the prevailing conditions.


Safety system

The safety system comes into action in any of the following coses:

Overload by 3 kg: when the traction force exceeds the set force level by 3 kg
The patient presses the safety button: whenever the patient, for whatever reason, presses the safety button the traction force will diminish to the lowest level, i.e. 2 kg. This safety measure is independent of the circuits within the unit. This means that the safety key will operate even when the internal circuits are out of order.

• Traction on the back and the neck
• Traction modes: harmonic, static, intermittent
• Maximum traction of 99 kg
• Speed of variable traction
• Adjust force, rest, traction and rest duration
• Safety system for tractions in excess of 20 kg
• Patient's safety button